FR1G资料

SURFACE MOUNT FASTSWITCHING RECTIFIER

FEATURES• Ideal for surface mount pick and place application • Low profile package• Built-in strain relief • High surge capability• Open junction chip,silastic passivated• Fast recovery for high efficiency• High temperature soldering guaranteed: 260oC/10sec/at terminalSHANGHAI SUNRISE ELECTRONICS CO., LTD.FR1A THRU FR1MTECHNICALSPECIFICATION

VOLTAGE: 50 TO 1000V CURRENT: 1.0ADSMA/DO-214ACBAIDFGMAX.MIN.MAX.MIN.CHMECHANICAL DATA• Terminal: Plated leads solderable per MIL-STD 202E, method 208C• Case: Molded with UL-94 Class V-O recognized flame retardant epoxy• Polarity: Color band denotes cathodeCABD.075(1.90).012(0.305).110(2.79).177(4.50).100(2.).157(3.99).052(1.32).006(0.152)EFGHI.208(5.28).090(2.29).008(0.203).060(1.52).035(0.88).194(4.93).078(1.98).004(0.102).030(0.76).027(0.68)Dimensions in inches and (millimeters)MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS(Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25C, unless otherwise stated,for capacitive load,derate current by 20%)

o

RATINGS

Maximum Repetitive Peak Reverse VoltageMaximum RMS Voltage

Maximum DC Blocking Voltage

Maximum Average Forward Rectified Current

SYMBOL

VRRMVRMSVDC

FR1A503550FR1B10070100FR1D200140200FR1G400280400FR1J600420600FR1K800560800FR

UNITS1M1000V700V1000V

AAVµA

µAnSpF

oo

IF(AV)1.0

(TL=110oC)

Peak Forward Surge Current (8.3ms singleIFSM30half sine-wave superimposed on rated load)Maximum Instantaneous Forward VoltageVF1.3(at rated forward current)

5.0Maximum DC Reverse CurrentTa=25oCI

Ro

200(at rated DC blocking voltage)Ta=125C150trr250Maximum Reverse Recovery Time(Note 1)

15CJTypical Junction Capacitance(Note 2)

30Typical Thermal Resistance(Note 3)Rθ(ja)

-50 to +150Storage and Operation Junction TemperatureTSTG,TJ

Note:

1.Reverse recovery condition IF=0.5A, IR=1.0A,Irr=0.25A. 2.Measured at 1.0 MHz and applied voltage of 4.0Vdc

3.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area

500

C/WC

http://www.sse-diode.com